Goldammer USB Basic light - Measuring Card (8 Channels)
USB measuring card (8 channels) - simultaneous capture with your PLC
Use measuring cards for your DASYLab SPS Edition (for PLC) to get further signals besides your PLC.
The measurement systems contains the compatible driver, therefore you can start uncomplicated.
Read In- and Outputs of your PLC (without available drivers)
Portable USB measurement system, USB 2.0 HighSpeed (480 Mbit/s), USB 1.1 compatible (12Mbit/s). 8 channel version with 8 single ended inputs. All versions offer analog inputs and outputs with a resolution of 16 bits.
Technical Specs
| AD | |
|---|---|
| Channels | 8/4 |
| Resolution | 16 Bit |
| Sample rate (sum) | 250 kHz |
| Voltage range | ±10 V; ±5 V; ±2,5 V; ±1,25 V; |
| Simultanous sampling | - |
| DA | |
| Channels | - |
| Resolution | - Bit |
| Output rate (sum) | - |
| Voltage range | - |
| Counter | |
| Channels | 1 |
| Resolution | 32 Bit |
| Basic frequency | 10 MHz |
| Counter versions | impulse counter, frequency counter (resolution: 10Hz) |
| Rotarycounter | |
| Channels | 1 |
| Resolution | 32 Bit Bit |
| Basic frequency | 10 MHz |
| Counter versions | 1x, 2x, und 4x programable Interpolation, |
| maximum input-frequency 10MHz | |
| Digital IO | |
| Dig.-In channels | 4 |
| Dig.-Out channels | 4 |
| Dig.-IO channels | - |
| Miscellaneous | |
| Optocoupled | yes (Ue. 2,4 -30 Volt) |
| Case | - |
| Dimensions | 120 x 114 x 49 mm |
| Connectors | 26 pin connector for ribbon cable |
| RoHS compliant | yes |
| Power supply | Powersupply via USB-bus (260 mA). |
Optional configurations
Hardware options and extensions
- (G0C-30C0-0) Clip for wall mounting of aluminium cases
- (G0C-30C0-1) Clip for wall mounting of aluminium cases
- (G0C-30D0-0) 16 channel instrumentation amplifier
- (G0C-30D0-2) 16-channel instrumentation amplifier with extended input voltage range ±50V
- (G0C-30D0-5) 16 channel instrumentation amplifier with extended input voltage range ±50V
Request your offer
We are pleased to help you:
SL-automation GmbH & Co. KG
Telephone: +49 (0) 731 98588-790
This email address is being protected from spambots. You need JavaScript enabled to view it. or by contact form
SL-automation GmbH & Co. KG
Telephone: +49 (0) 731 98588-790
This email address is being protected from spambots. You need JavaScript enabled to view it. or by contact form
Our recommendation for the the basic signal detection
MultiChoice USB Basic in streamlined rugged aluminium cast case, 8 channel 250kHz version with 16 bit resolution for analog acquisition and output, analog signal terminals on the case, digital ports:
8 ports in bit groups, can be set to inputs/outputs, detachable Weidmüller screw terminals. Over voltage protection of analog inputs: ±40 V, powered on/powerless, voltage supply 220V AC / 5V DC is included.
4 Digital In- and Outputs
Averaged sample rate 250kHz, input voltage range ±10 V, programmable amplification 1/2/4/8, 4 channel D/A converter, sample rate 10 kHz, 16 bits, output voltage range ±10 V. 4 digital inputs/outputs,
in (*16) bit groups, can be set as input or output, synchronous sampling of analog input values, external trigger and clock. 2x24 bit 10 MHz event counter, synchronous sampling of counters containing analog values.
